We manufacture two types of dental casting nickel-chromium alloys: crowns and ceramic firing.

Dan Chrome Soft III

Dan Ceramalloy

Category	Product Name	Type	Price
Crown /Bridge	Dan Chrome Soft III	Shot	Shot 1kg 28,600円 500g 15,500円
Porcelain Alloy	Dan Ceramalloy	5g片	Ingot 100g 10,000円

Specification

Product Name	Induction Casting		Specification
	Oxygen + Propane gas	High Frequency
Dan Chrome Soft III	Cast timing movie Dan Chrome Soft III Heater ingots evenly until they all lump. It casts 3-4 seconds later after the heated metal moves. ( The metal surface must be torn. ) Blowpipe	Cast timing movie Dan Chrome Soft III Heat ingots evenly until they all lump. It casts 2-3 seconds later after the heated metal moves.	This alloy shines with a whitish hue for crowns. It has the highest shipping volume among our nickel-chromium alloys, making casting timing easily discernible.
Dan Ceramalloy	Cast timing movie Dan Ceramalloy The casting when out of shape. Blowpipe	Cast timing movie Dan Ceramalloy Casting at the same time as lost of our the shadow of the heated metal.	For porcelain alloy. Non beryllium.

Composition

Product Name	Physical Properties				Composition(%)
	Hard ness (HV)	Melting Point (C)	Tensile Strength (MPa)	Elong ation (%)	Ni	Cr	Cu	Mo	others	備考
Dan Chrome Soft III	200	1304	441	10.0	80.5	6.0	7.0	–	6.5	–
Dan Ceramalloy	250	1324	569	12.0	65.7	20.0	–	8.6	6.3	–

This is a dental casting alloy suitable for use in cores. It allows for creating cores at a lower cost compared to silver alloys.

Dan White

Category	Product Name	Type	Price
コア	Dan White	Ingot(5g片)	Ingot 1kg 27,650円 500g 14,700円 100g 3,070円

Composition

Product Name	Physical Properties				Composition(%)
	Hard ness (HV)	Melting Point (C)	Tensile Strength (MPa)	Elong ation (%)	Zn	Cu	Ni	others
Dan White	240	934	600	7.0	42.0	35.0	18.0	5.0