|
Ni-Cr Alloy
Category |
Product Name |
Type |
Permission Code -JAPAN- |
Crown /Bridge |
Dan Chrome Soft III |
Shot |
20100BZZ00770000 |
Clasp /Bar /Metal plate |
Dan Clasper |
Ingot 8g |
21100BZZ00234000 |
Porcelain Alloy |
Dan Ceramalloy |
Ingot 5g |
20100BZZ01431000 |
Specification
Product Name |
Induction Casting |
Specification |
Oxygen + Propane gas |
High Frequency |
Dan Chrome
Soft III |
Cast timing movie
Heater ingots evenly until they all lump. It casts 3-4 seconds later after the heated metal moves. ( The metal surface must be torn. )
|
Cast timing movie
Heat ingots evenly until they all lump. It casts 2-3 seconds later after
the heated metal moves. |
White. It cast timing is comprehensible. Best seller in the Ni-Cr Alloy products our company. |
Dan Clasper |
Cast timing movie
The casting when out of shape. ( It doesn't become a lump. )
|
Cast timing movie
Casting at the same time as lost of our the shadow of the heated metal.
|
Ni-Cr Alloy for clasp, bar, CRISTOBALITE INVESTMENT can be used by using the high frequency casting machine. Thicken when you use CRISTOBALITE INVESTMENT. ( Melting metal might penetrate by pressure. |
Dan Ceramalloy |
Cast timing movie
The casting when out of shape.
|
Cast timing movie
Casting at the same time as lost of our the shadow of the heated metal.
|
For porcelain alloy.
Non beryllium. |
|
|
|
|
Composition
Product Name |
Physical Properties |
Composition(%) |
Hard ness (HV) |
Melting
Point (C) |
Tensile
Strength (MPa) |
Elong ation (%) |
Ni |
Cr |
Cu |
Mo |
others |
Note |
Dan Chrome Soft III |
200 |
1304 |
441 |
10.0 |
80.5 |
6.0 |
7.0 |
- |
6.5 |
- |
Dan Clasper |
420 |
1253 |
980 |
9.0 |
66.0 |
16.0 |
3.0 |
2.0 |
13.0 |
- |
Dan Ceramalloy |
250 |
1324 |
569 |
12.0 |
65.7 |
20.0 |
- |
8.0 |
6.3 |
- |
|